PowerDrain - S100K
ACO PowerDrain S100K is a modular heavy duty polymer concrete trench drain system with a 4" internal width. Manufactured with a cast-in ductile iron edge rail, S100K is favored for heavy duty installations. Common applications for S100K include:
• Heavy duty industrial applications
• Gas stations
• Docks and ports
• Semi-truck parking areas
• Military bases
PowerDrain S100K is available in 30 one-meter interconnecting channels with a progressive 0.6% slope. The system also offers four neutral (non-sloping) channels that can be used to extend the run beyond 30 meters. Half meter sections can be used to create 90 degree turns or reduce the amount of site fabrication.
The ductile iron edge rail provides heavy duty protection for all surfaces subject to load as well as the grate bearing surface. Standard grating is Class F heavy duty vehicle/aircraft rated. Slotted iron and transverse slotted ADA conforming grates are available with the patented PowerLok boltless locking system. PowerLok allows for quick and secure fitting of the grates during installation and service. Anti-shunt lugs, built into the edge rail, prevent longitudinal movement thus ensuring the grate is unaffected by vibration.
INTERCONNECTING END PROFILES
allow easy and effective joining of channels.
0.6% sloped channels in meter lengths and 30 depths which connect to create 30 meter (98'-5") continuously sloping run.
Supplied complete with grate.
Neutral channels available in 4 depths. Can be used to create non-sloped runs, or inserted in sloped runs to increase length.
CLOSING/4" INLET/OUTLET CAP
Fits all channels, manufactured from black
ABS to complement edge rail. Guides
aid cutting to correct height. 4" bell end
connection to Schedule 40 pipe. Seal using
Note: For depth 1-10 channels
ACO recommends removal of
unused sections of bell end.
SERIES 600 CATCH BASINS
Catch basins with 4", 6" and 8" drill-outs
for pipe connection. Supplied complete with
grate. Available with plastic trash bucket or
filter bag. Riser unit fits between top and
bottom unit. Options include a choice of
deep or short bases.
Any channel can be connected into the
catch basin by removing the end wall to the
correct height. Drill-outs guide connection
to channels 5, 10, 15, 20, 25 and 30.