| |||||
| |||||
| Home | About Us | Products & Services | Search | Contact Us | |
| |||||
 Embed Frames |
|
| More related links... | |
Frame
Specifications |
|
|
 mbed
Frames cast into concrete floors and substructures serve a multitude of purposes that
extend the effective life of your completed construction project. Frames form a
permanent shield for concrete lead edges and perimeters which are subject to cracking and
chipping when left unprotected. During construction, these rigid 1/4" (minimum)
thick steel frames expedite forming and provide a welded structure that assures accuracy
in the concrete pour. Frames provide a uniform bearing surface for grates or covers,
often eliminating rocking or irregular elevations experienced
with covers installed on poured concrete. In specifying Grating Pacific Embed
Frames, you are specifying durability, accuracy and economy. (Nail holes are
optional and may further expedite installation. If desired, size and location should
be specified.) |
|
|
|
|
| E-Z
POUR FRAMES Grating Pacific E-Z Pour frames are designed to expedite forming and provide superior concrete embedment. Assembled with continuous anchors on the non-bearing sides, E-Z Pour frames install quickly and provide superior drainage. |
 |
|
|
| TYPE L FRAME All frames are available in four sided, one piece welded construction units and can accommodate any clear opening. Simply specify the frame type from the sections below, the desired clear opening, and the desired grating or cover thickness. |
 |
|
||
| FRAME SECTIONS | |
 |
|
||
|
| ANCHORS | |
 |
|
FINISHES | |
| All frames are provided with 3/8" X 4" headed concrete stud anchors welded within 6 inches of each corner and at a maximum of 24 inches on center. Alternative anchors sizes and spacings may be designated by the specifying authority. | Carbon steel frames are manufactured with either of three standard finishes, bare steel (no finish), prime painted, or hot dip galvanized after fabrication. Aluminum frames are provided mill finish and can be specified with bituminous coating on surfaces to be cast in concrete. Stainless steel frames are supplied mill finish and can be specified as abrasive blasted after fabrication to provide a uniform matte finish. |
|
|
| TRENCH GRATING & INLET GRATES |  |
| The combination of Grating Pacific gratings and embed frames provides the specifier with a wide range of alternatives for drainage applications. While any of the bar grating products and embed frames included on other pages can be combined for effective solutions, standard trench gratings and inlet sets are illustrated as well. Look there first for your most economical solution to drainage requirements. |
|
| CUSTOM SETS |  |
| If the standard sets shown in standard trench gratings and inlet sets do not adequately address your specific application in either load capacity or appearance, please contact our engineering department. We will gladly assist in the selection of an appropriate alternative from our wide range of versatile products. |
