| All grating must be firmly fastened in
place. Welding panels to the supporting structure provides a superior, permanent
installation. Gratings subject to removal can be fastened with Weld Lugs which are
shop welded between the bearing bars, or anchored with Saddle Clips. These
fasteners, which are provided upon request, are punched with 5/16" holes to receive
1/4" bolts or screws (bolts or screws supplied by others). In areas where
welding or drilling is not permitted, "G" Clips can provide the fastening
solution. These clips install on the top surface of the grating and create a
friction connection with the flange supporting the panel. The narrow spacing of
close mesh gratings allows for countersinking of the bearing bars and fastening with flat
head screws. |
Fasteners & Banding
