| |||||
| |||||
| Home | About Us | Products & Services | Search | Contact Us | |
| |||||
 Grip Strut®
Resurfacing Products |
| GRIP STRUT®
RECONDITIONING MATERIAL |
|
 |
Here's the safety first way to re-do worn and unsafe floors and stairs. Resurface with non-slip GRIP STRUT Safety Grating Reconditioning Material (RM). GRIP STRUT Grating is the only product that gives wall-to-wall teeth per sq. ft. Serrated, diamond-shaped openings make GRIP STRUT Grating 10 to 180% safer than conventional gratings- permits mud, oil, grease, and industrial waste to fall through when used over open floor material such as bar grating. Even ice shears free under normal foot pressure. Down-turned edges allow grating to lie flat and secure over existing flooring. Consult Grating Pacific for product specifications. |
| Other important GRIP STRUT Grating advantages include: easy field fabrication and fast, low-cost installation. RM products available on special order in standard material and sizes. |
|
||||
|
||||
|
||||
|
|
| DIMENSIONS - STEEL & ALUMINUM | |||||||
| DIAMONDS | |||||||
| DIMENSION | 1 | 2 | 3 | 4 | 5 | 8 | 10 |
| W1 W2 |
2-7/8" 3-5/16" |
5-3/16" 6-1/4" |
7-1/2" 8-9/16" |
9-13/16" 10-7/8" |
12-1/8" 13-3/16" |
19-1/16" 20-1/8" |
23-11/16" 24-3/4" |
| NOTE: FOR
SPECIFICATIONS & TOLERANCE NOT INDICATED, SEE GRIP STRUT SECTION |
|
| FLAT STOCK GRIP STRUT® |
||
 |
|
The open matrix is
symmetrical about the flat plane. Table (below)
indicates the approximate dimensions of flat metal available on
each side. Flat Stock can also be manufactured to specified dimensions of flat metal
on either or both sides. |
FLAT
STOCK AVAILABLE IN ALL |
||
|
| DIMENSIONS - STEEL & ALUMINUM | |
| MATRIX | FLAT METAL EACH SIDE |
| 2-DIAMOND 3-DIAMOND 4-DIAMOND 5-DIAMOND 8-DIAMOND 10-DIAMOND |
2-1/4" to
7-1/2" 2-3/8" to 6-1/2" 2-3/8" to 7-5/8" 2-3/8" to 6-1/2" 2-3/8" to 5-5/8" 3-1/4" to 7-5/8" |
