1/4" FORMED BRACKET

Available in steel, aluminum, stainless steel (3/16" thick) and bronze with one, two or three hole mounting options. Snap-on covers are used with these brackets to cover the mounting hardware. Anodized and satin finishes available upon request.

STYLE B BRACKET 3/16" FORMED

A Wagner Original - Steel, 1006-1010. Available in Stainless Steel, 304 or 316, and Muntz, C28000. Tested to a 300 lb. concentrated load. Universal saddle for use with round or flat handrail sections.­


* This bracket uses a new forming die to adjust the vertical clearance from the underside of the handrail to the horizontal arm to meet the 1 1/2" now required by many building codes.
NOTE: Many of our stamped brackets utilize the same blanking dies. Different forming dies are applied to vary the distance to center line (c) dimension. The images shown here ­are for reference only.

STYLE C BRACKET 3/16" FORMED

For use on flat walls, pipe and round tube posts, square and rectangular tube posts and in areas with limited mounting space. Universal saddle can be used with round or flat handrail sections. Also available in Stainless Steel and Bronze

SNAP-ON COVER

For concealed mounting of single hole 1/4" formed brackets shown above. Two and three hole brackets must be countersunk to use these covers. Cover only; bracket not included.