Grip Strut® Resurfacing Products

GRIP STRUT® RECONDITIONING MATERIAL

Here's the safety first way to re-do worn and unsafe floors and stairs. Resurface with slip-resistant Grip Strut® Safety Grating Reconditioning Material (RM). Grip Strut® Grating is the only product that gives wall-to-wall teeth per sq. ft. Serrated, diamond-shaped openings make Grip Strut® Grating 10 to 180% safer than conventional gratings - permits mud, oil, grease, and industrial waste to fall through when used over open floor material such as bar grating. Even ice shears free under normal foot pressure. Down-turned edges allow grating to lie flat and secure over existing flooring. Consult Grating Pacific for product specifications. Other important Grip Strut® Grating advantages include: easy field fabrication and fast, low-cost installation. RM products available on special order in standard material and sizes.

THICKNESS:
            • STEEL: 14 GA. & 12 GA.
            • ALUM: .080” (12 GA.), .100 (10 GA.)
            • STAINLESS STEEL: 16 GA. (4 OR 5 DIAMOND ONLY)

Grip Strut® Resurfacing Products

FLAT STOCK GRIP STRUT®

The open matrix is symmetrical about the flat plane. Table (provided) indicates the approximate dimensions of flat metal available on each side. Flat Stock can also be manufactured to specified dimensions of flat metal on either or both sides. Consult Grating Pacific for specifications and availability.

FLAT STOCK AVAILABLE IN ALL STANDARD
MATERIALS AND SIZES