| |||||
| |||||
| Home | About Us | Products & Services | Search | Contact Us | |
| |||||
 Pultruded Fiberglass Grating |
|
| More related links... | |
 I-4015 1-1/2" DEEP "I" SERIES
(LOAD BARS 1" O.C.) |
|
| T-2510 1" DEEP LIGHT DUTY "T"
SERIES (LOAD BARS 2" O.C.) |
|
|
|
|
|
 ultruded
grating provides performance far exceeding that of alternative products with a comparable
installed cost. This advanced fiberglass grating is designed for use in a wide range
of applications that require strength and corrosion resistance. Manufactured with a
high percentage of glass within the laminate, pultruded grating combines durability with
the highest strength and stiffness available in fiberglass grating. Pultruded
grating can be used with confidence in application where wide support spans are required.Using both mechanical and chemical lock, pultruded grating is manufactured with a two-piece cross bar configuration which increase the panel's support and stability under load. The standard grit-top walking surface provides sure footing and a protective synthetic veil, covering the exterior surface of the load bearing bars allows the grating to reliably withstand constant exposure to ultraviolet rays. | |||
|
|||
|
|||
| CHARACTERISTICS OF PULTRUDED GRATING | |||||||
|
| PULTRUDED GRATING STOCK LIST |
|
Pultruded grating is available in two resin formulations for an accurate match of product characteristics with the application. Both resin systems provide corrosion resistance that is superior to that offered by metal grating. |
| ISOFR (YELLOW)- This isophthalic polyester resin formulation provides a low flame spread rating of 25 or less and is designed for applications where there is moderate exposure to corrosive elements. |
| VEFR (GRAY)- With a flame spread of 25 or less, this vinyl eater resin system provides dependable resistance to both acidic and alkaline environments. |
FOR ASSISTANCE IN SELECTING THE RESIN MOST APPROPRIATE FOR YOUR ENVIRONMENT, CONSULT THE "CHEMICAL RESISTANCE GUIDE" . |
|
||
|
|
|
|
||
| PULTRUDED GRATING STOCK LIST | |||||||
| CATALOG NO. |
GRATING DEPTH |
WEIGHT LBS./SQ.FT. |
WIDTH OF TOP FLANGE |
WIDTH OF OPEN AREA |
% OPEN AREA |
RESINS/(COLOR) AVAILABLE |
|
| INDUSTRIAL DUTY "I" SERIES | |||||||
 |
I-6010 | 1" | 2.4 | 0.6" | .900" | 60% | ISOFR (Yellow) & VEFR (Gray) |
 |
I-4010 | 1" | 3.5 | 0.6" | .400" | 40% | ISOFR (Yellow) & VEFR (Gray) |
 |
I-6015 | 1-1/2" | 2.9 | 0.6" | .900" | 60% | ISOFR (Yellow) & VEFR (Gray) |
 |
I-4015 | 1-1/2" | 4.2 | 0.6" | .400" | 40% | ISOFR (Yellow) & VEFR (Gray) |
| INDUSTRIAL DUTY "T" SERIES | |||||||
 |
T-5020 | 2" | 3.1 | 1.0" | 1.00" | 50% | ISOFR (Yellow) & VEFR (Gray) |
 |
T-3320 | 2" | 4.0 | 1.0" | .500" | 33% | ISOFR (Yellow) & VEFR (Gray) |
| LIGHT DUTY "T" SERIES | |||||||
 |
T-1210 | 1" | 2.6 | 1.5" | .214" | 12.5% | ISOFR (Light Gray) |
 |
T-2510 | 1" | 2.3 | 1.5" | .500" | 25% | ISOFR (Gray) |
 |
T-3810 | 1" | 1.9 | 1.5" | .900" | 38% | ISOFR (Gray) |
 |
T-5010 | 1" | 1.6 | 1.0" | 1.00" | 50% | VEFR (Gray) |
 |
T-5015 | 1-1/2" | 1.9 | 1.0" | 1.00" | 50% | VEFR (Gray) |
| TO PROPERLY SPECIFY "I" AND "T" SERIES PULTRUDED GRATING, SIMPLY ADD "-I" FOR ISOFR RESIN OR "-V" FOR VEFR RESIN TO THE CATALOG NUMBERS SHOWN ABOVE. EXAMPLES: I-6015-V, T-3320-I |
|
|
| PULTRUDED GRATING FASTENERS | |
| Type "M" 316 stainless steel hold down clips used to secure panels to a support using two adjacent grating bars for a secure fit. |  |
| Type "G" stainless steel hold clips designed to attach grating to any structural member flange, 3/4" or smaller in thickness, with no drilling required. | |
| Type "FB" 316 stainless steel flange blocks fit inside close mesh products allowing for installation of cap screws from the top surface of the grating. | |
| Type "RK" 316 stainless steel fasteners offer effective and more secure means for installing pultruded grating. | |
