|
TYPE "S"
Designed to support pedestrian loads, type
"S" grates are manufactured from welded grating with
durable 3/16" (min.) thick bearing bars. Open area of nearly 80% allows for
fast clearing of moisture and run-off. |
|
|
 |
TYPE "SA"
Standard Duty type "SA"
grates are designed to conform with strict ADA spacing requirements. Open area of
66% allows for drainage and ventilation while maintaining a safe traffic surface. |
|
|
|
TYPE "SP"
Type "SP"
grates also comply with ADA spacing requirements. Additionally, the 1/4"
maximum clear opening between the bars make these grates desirable in areas subject to
pedestrian traffic where high heeled shoes are common. |
|
|
TYPE "H"
Type "H"
grates are manufactured from stout, 3/8"(min)thick bearing bars. Designed to serve
the most rigorous truck and forklift loads. With nearly 70% open area, these
products are ideal for parking lot and highway drain applications. |
|
|
|
TYPE
"HA"
Heavy Duty type "HA"
grates are similar to type "SA"
above with the exception that these grates are additionally designed to support forklift
and vehicular loads. |
|
|
|
TYPE "HP"
Heavy duty type "HP"
grates are similar to type "SP"
above with the exception that these grates are additionally designed to support forklift
and vehicular loads. |
|
Trench Grating & Inlet Sets
rating
Pacific Trench Grating Systems and Inlet Sets combine our most popular gratings and embed
frames to provide economic, modular components for construction projects. These
products are offered in our Standard series, designed to serve
pedestrian loads, and our Heavy Duty series, designed to service
the most demanding vehicular traffic. Each series is offered with multiple bar
spacings (shown below) to address the specific needs of your application.
